UV and non-mainstream version of the general PS

UV and non-mainstream version of the general PSUse UV PS version of the CTP and the general way of Germany BasysPrint company UVSetter, the main selling point is the work environment is very open, as the proofing room; second plate with a high sensitivity to the PS version; third the machine is XY-axis exposure, there is no turning components, better maintenance. Most prominent feature is a massive mirror, with many small cover open mechanism, identify and control the formation of the core. It is still negative for the film version Stamped appropriate, because you can have stamped at the exact exposure of the region do not stamped or without fast-moving part to save the exposure time. This advanced concept of using traditional materials, should be able to save costs, but expensive machine, now people buy too much, is still non-mainstream sectors.

 

non-mainstream ribbon thermal imagingRibbon thermal imaging CTP, MAN Roland DicoWeb Only in this way in the use of, believe that other manufacturers will reference the reusable, non-photosensitive, heat-sensitive layer coating, only sensible heat stamped with the material forming this to reduce the number of supplies, environmental protection is also very beneficial, but the amount of anti-Indian remains to be done to improve.

 

non-mainstream platform-sensitiveSmall CTP, they use a platform-type light-sensitive, but the light source and the third block above the XY axis are moving in different ways, but the printed version of the X-axis, Y axis from the light source to one side to the other side to do the linear scan , with the X-axis to form light-sensitive surface, fewer moving parts.

 non-mainstream inkjet imagingInkjet CTP in two ways: one is directly oily ink-jet imaging on a blank plate, cheap and easy way, the amount of resistance in India, of the 20,000; other is sprayed on in a positive PS plate chip The shading method, the film is mainly free, but still re-spraying stamped exposure and development, all the conditions such as traditional printing PS plate, such as the 600dpi inkjet still can only do rough work, use more than 1200X1200dpi is very available, If the dots to 1800dpi very fine used, this is the future development potential of the CTP cheaper way.